#1. Activation Instructions

Activation Code(s) for 2002 Toyota Camry:

226

1. Press the FUNCTION I and PANIC buttons at the same time. Release when the STATUS LIGHT stays illuminated steady indicating you have entered ACTIVATION MODE.


2. Enter your three digit ACTIVATION CODE within 15 seconds.

  • Use the LOCK button for the first digit.
  • Use the UNLOCK button for the second digit.
  • Use the TRUNK button for the third digit.


For example: If your ACTIVATION CODE is 512, press the LOCK button 5 times, the UNLOCK button 1 time, and the TRUNK button 2 times.

3. Press the FUNCTION I and PANIC buttons at the same time. The STATUS LIGHT will turn off.

4. Watch the remote’s STATUS LIGHT. The STATUS LIGHT will flash back the ACTIVATION CODE sequence.

For example: If the ACTIVATION CODE you entered is 512, the STATUS LIGHT will emit a series of flashes matching the ACTIVATION CODE entered in Step #2.

#2. Pairing Instructions

  1. Start with the key out of the ignition, and the driver's door is open. All others are closed, and the driver's door is unlocked.
  2. Perform these steps within 5 seconds.
    1. Insert the key into the ignition (Do NOT Turn). Pull key out.
    2. Insert the key into the ignition (Do NOT Turn). Pull key out.
  3. Perform these steps within 40 seconds.
    1. Close then open the driver's door.
    2. Close then open the driver's door.
    3. Insert the key into the ignition (Do NOT Turn). Pull key out.
  4. Perform these steps within 40 seconds.
    1. Close then open the driver's door.
    2. Close then open the driver's door.
    3. Insert the key into ignition, and leave it in ignition.
    4. Close the driver's door.
    5. Turn the ignition to ON (Do NOT Start) then back to OFF.
    6. Remove the key from the ignition.
  5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
  6. Perform these steps within 40 seconds.
    1. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
    2. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then

unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.

  1. Repeat steps A and B in step 6 for each new remote.
  2. Open driver's door.

If you're having trouble with this online manual, there is more information in our electronic copy of the print manual



Patent Pending




Sign up for our product updates mailing list: