#1. Activation Instructions

Activation Code(s) for 2006 Nissan 350Z:

325

1. Press the FUNCTION I and PANIC buttons at the same time. Release when the STATUS LIGHT stays illuminated steady indicating you have entered ACTIVATION MODE.


2. Enter your three digit ACTIVATION CODE within 15 seconds.

  • Use the LOCK button for the first digit.
  • Use the UNLOCK button for the second digit.
  • Use the TRUNK button for the third digit.


For example: If your ACTIVATION CODE is 512, press the LOCK button 5 times, the UNLOCK button 1 time, and the TRUNK button 2 times.

3. Press the FUNCTION I and PANIC buttons at the same time. The STATUS LIGHT will turn off.

4. Watch the remote’s STATUS LIGHT. The STATUS LIGHT will flash back the ACTIVATION CODE sequence.

For example: If the ACTIVATION CODE you entered is 512, the STATUS LIGHT will emit a series of flashes matching the ACTIVATION CODE entered in Step #2.

#2. Pairing Instructions

  1. Close and lock all doors with the driver's side power lock/unlock switch.
  2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully.

NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.

  1. Insert key into the ignition cylinder and turn to the ACC position.
  2. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.
  3. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver's side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).
  4. Turn the key to the OFF position, remove keys from the ignition. Unlock the doors using the driver's side power unlock/lock switch and open the driver side door.

If you're having trouble with this online manual, there is more information in our electronic copy of the print manual



Patent Pending




Sign up for our product updates mailing list: